Most frames sold as “Polaroid” fit Instax Mini prints, not real Polaroids. Here are frames sized for i-Type and 600, Go, and Instax Mini, Square and Wide prints.
Looking for a digital frame for a phone photo instead? Our free Polaroid frame PNGs and templates cover that. This page is about physical frames.
Prices are from the November 2026 check (11 November) and change often. We haven’t handled any of these frames. Fit is what the maker or the listing says, or arithmetic from the published print sizes.
Which frame size fits your prints
Read the size in the listing, not the word “Polaroid” in the title.
| Film | Print size | Frame size to look for | Picks below |
|---|---|---|---|
| Polaroid i-Type, 600, SX-70 | 88 x 107 mm (3.5 x 4.2 in) | “3.5 x 4.25 in” or “i-Type/600/SX-70” | Polaroid Acrylic Photo Frame, Polaroid UV Protective frames, SULEPE magnetic frames |
| Polaroid Go | 54 x 67 mm (2.1 x 2.6 in) | “Polaroid Go” | Polaroid Go Acrylic Multiframe |
| Instax Mini | 54 x 86 mm (2.1 x 3.4 in) | “2 x 3 in” or “Instax Mini” | WINKINE Mini frames |
| Instax Square | 72 x 86 mm (2.8 x 3.4 in) | “Instax Square” or “2.8 x 3.4 in” | CAIYOULE Square magnetic frames |
| Instax Wide | 108 x 86 mm (4.3 x 3.4 in) | “Instax Wide” or “108 x 86 mm” | WINKINE Wide frame |
Print sizes are from Polaroid’s support site and Fujifilm’s film pages. The instant film sizes page has the picture area of each format as well.
Best for Polaroid i-Type, 600 and SX-70: Polaroid Acrylic Photo Frame
Polaroid’s Acrylic Photo Frame holds one print in front, with magnetic closures. Behind it, an L-shaped stand leaves room to store up to 50 more prints, according to polaroid.com. Swap the one on show whenever you like.
It’s 100% acrylic, black, and measures 103 x 63 x 134 mm (4 x 2.5 x 5.3 in). Polaroid lists it for i-Type, 600 and SX-70 film. It was $14.99 at polaroid.com at the November 2026 check.
Three frames in one box: the Acrylic Photo Frame 3-Pack has three free-standing magnetic frames with different edges (plain, scalloped and wave), for the same films. It was $26.99. Polaroid says the stands and fronts swap between the three.
Best UV-protective frame: Polaroid UV Protective Photo Frame
If the frame sits in daylight, this is the one Polaroid makes for it. Polaroid says the frame is made with “a material resistant to natural light” and lists it as a UV-protective frame. It gives no UV-blocking percentage.
- Single, $24.99: one full-frame print, 158 x 177 x 30 mm (6.2 x 6.9 x 1.1 in).
- Triple, $34.99: three prints side by side, 375 x 177 x 30 mm (14.8 x 6.9 x 1.1 in).
Both are black, made of PVC and acrylic, and listed for i-Type, 600 and SX-70 film. Prices are from polaroid.com at the November 2026 check. The PVC matters if you plan to keep prints in the frame for years: the National Archives says to avoid PVC near photos. Polaroid doesn’t say which part of the frame is PVC.
Best for Polaroid Go: Polaroid Go Acrylic Multiframe
Go prints are 54 x 67 mm, small enough to rattle around in a full-size Polaroid frame. Polaroid’s Go Acrylic Multiframe holds three Go prints in a zigzag. It’s 100% acrylic, 220 x 6 x 76 mm (8.7 x 0.2 x 3 in), in black or blue. It was $9.99 at polaroid.com at the November 2026 check.
It’s the only Go-size frame on Polaroid’s frames page. For how Go prints compare with full-size ones, see Polaroid Go vs Polaroid Now.
Best for Instax Mini: WINKINE tabletop frames
WINKINE’s Mini frames are a clear acrylic block that slides onto a U-shaped stand, with the print between. The listing gives the picture size as 2.1 x 3.4 in, which matches an Instax Mini print (54 x 86 mm), and says they stand upright or sideways. A 3-pack in white was often found for about $16 at the November 2026 check, and owners typically rate it about 4.5 out of 5. Other colours sit on the same listing.
The title calls them “Mini Polaroid Frame 2x3”. Here “Polaroid” means the look, not the film: a full-size Polaroid print won’t fit.
For the fridge: small magnetic acrylic frames sized 2.36 x 3.54 in (60 x 90 mm) take Mini prints with a little room to spare. An 8-pack is often rated about 4.5 out of 5 by owners. Check the current price. How to display Polaroid pictures has more fridge and wall ideas.
Polaroid-size magnetic frames: SULEPE 6-pack
For full-size Polaroid prints on a fridge or a metal board, SULEPE’s magnetic frames are listed at 3.5 x 4.25 in for i-Type, 600 and SX-70 film. Each frame is two 2.5 mm clear acrylic panels held together by magnets, with no edge. The listing says you can also use each panel alone, so the 6-pack can hold up to 12 photos. The 6-pack was often found for about $25 at the November 2026 check, and owners typically rate it about 4.5 out of 5.
The listing also names Instax Wide. That works on paper: a Wide print turned on its side is 86 x 108 mm, close to a Polaroid print at 88 x 107 mm. The listing also warns that the frames won’t hold on glass boards or any surface that isn’t metal.
Best for Instax Square: CAIYOULE magnetic frames
Square prints are 72 x 86 mm. In a Polaroid-size frame they sit loose, and they won’t fit a Mini frame. CAIYOULE sells magnetic pocket frames for Instax Square in a 30-pack. The listing gives the pocket as 3.5 x 2.9 in, with a polypropylene frame, a clear front and a magnetic back. The 30-pack was often found for about $19 at the November 2026 check, and owners typically rate it about 4.5 out of 5.
That works out to about 63 cents a frame. Polypropylene is one of the plastics the Library of Congress lists as safe for photos.
Best for Instax Wide: WINKINE Wide frame
WINKINE’s Wide frame is sized 108 x 86 mm, which is an Instax Wide print. The listing says it holds one Wide print or two Mini prints side by side. It has a 15 mm clear acrylic block in front of a 3 mm white back panel. The listing names the back material as medium density fibreboard. The Wide frame was often found for about $15 at the November 2026 check. It had few ratings then, so there is little owner feedback to go on.
For a fridge, the SULEPE magnetic frames above also list Instax Wide.
Wall and collage frames
Multi-print collage frames on Amazon mostly have 2 x 3 in openings. Comtraker’s “Polaroid Picture Frame Collage” (B0F54PQ2L3, often rated about 4 out of 5 by owners, check the current price) is one: the openings are 2 x 3 in, so it’s an Instax Mini frame despite the name. The one collage frame for i-Type and 600 prints we found had too few ratings at the November 2026 check to pick.
For full-size Polaroids on a wall, Polaroid’s UV Protective Triple above is one option. The other is one large poster frame with a grid of prints on the mat. The display ideas page shows how to lay out that grid.
Watch the word “Polaroid” in frame listings
- “2 x 3 in” or “2x3” means Instax Mini. Most frames titled “Polaroid frame” or “mini Polaroid frame” on Amazon are this size. They also fit 2 x 3 in Zink prints.
- “3.5 x 4.25 in” means a real Polaroid print. Look for i-Type, 600 or SX-70 in the title.
- Instax Square and Polaroid Go each need their own size. A Square print (72 mm wide) is too wide for a Mini frame, and a Go print (67 mm tall) sits loose in one. Both sit loose in a full Polaroid frame.
- Sizes in titles are the seller’s claim. Compare the listed opening with your print’s size in the table above.
Third-party frames above are named by their maker. None of them is made by Polaroid.
Before you frame a print
Wait 30 days with Polaroid prints. Polaroid says that for the first 30 days a print still holds chemicals that are not completely dry. Its frame pages repeat the advice: keep new prints in a cool, well-ventilated place for the first 30 days, then frame them.
Keep them out of the sun. To stop fading on display, Polaroid says to make sure the frame has UV-protective glass. Fujifilm says to keep developed Instax prints out of direct sunlight and suggests UV-protected frames or albums.
For more ways to show prints off, see how to display Polaroid pictures. To store the rest, the Polaroid photo album page has albums sized for each film. Other accessories are on Instax and Polaroid accessories.
FAQ
What size frame do I need for a Polaroid picture?
A Polaroid i-Type, 600 or SX-70 print is 88 x 107 mm (3.5 x 4.2 in). Look for frames listed as 3.5 x 4.25 in or for i-Type, 600 and SX-70 film. A 2 x 3 in frame is Instax Mini size and is too small.
Will an Instax Mini print fit a Polaroid frame?
It goes in but sits loose. A Mini print is 54 x 86 mm, against 88 x 107 mm for a Polaroid print. Buy a 2 x 3 in frame instead.
Do Instax Wide prints fit Polaroid frames?
Some listings sell the same 3.5 x 4.25 in frame for both, such as SULEPE’s magnetic frames. A Wide print is 108 x 86 mm, close to a Polaroid print turned on its side. That’s arithmetic from the sizes, not something we’ve tried.
Do Polaroid pictures fade in a frame?
They can fade in sunlight. Polaroid says to use a frame with UV-protective glass to stop fading on display, and to wait 30 days before putting a new print behind glass or plastic.
Does Polaroid sell frames?
Yes. At the November 2026 check, polaroid.com had acrylic frames from $9.99 (Go Acrylic Multiframe) to $34.99 (UV Protective Photo Frame - Triple).
What is the best frame for Instax Mini prints?
For a shelf, WINKINE’s 2 x 3 in acrylic frames were often found for about $16 for three at the November 2026 check, and owners typically rate them about 4.5 out of 5. For a fridge, look for magnetic frames sized 2.36 x 3.54 in.
Related reading
- How to Display Polaroid Pictures: 10 Ideas, From $5 Clips to UV Frames
- Instax Mini and Polaroid Photo Albums: Picks for Each Film Size
- Instant Film Sizes: Polaroid and Instax Sizes in Inches, to Scale
- Instax and Polaroid Accessories Worth Buying (and the Ones to Skip)
- 34 Polaroid Picture Ideas You Can Shoot With Any Instant Camera